How To Clean Out A Watts Lfn45bm1
Lol Miner i.45: Setup, Commands & algorithms
All Most LolMiner: Tuning For Maximum Profit.
This page describes how to go started mining with lolMiner 1.45 and newer.
Download for Windows / Linux
Download from the website Download releases from GitHub Download from BitcoinTalk
Review and DevFee
LolMiner - is a program for mining cryptocurrencies such as Ethereum, Beam, Ethereum Classic and many others. The software runs on Windows and Linux platforms.
DevFee (ETH) - 0.7%.
Setting up
To fix up a batch file, we demand to enter three commands:
-
set "POOL=eu1.ethermine.org:4444"- specify the pool accost -
fix "WALLET=0x360d6f9efea21c82d341504366fd1c2eeea8fa9d.lolMinerWorker"- specify the wallet address and subcontract name (whatsoever) -
lolMiner.exe --algo ETHASH --pool !POOL! --user !WALLET! timeout 10- we exit the standard command to run and the algorithm.
This is how the lolminer batch file for eth will look:
@echo off setlocal enableDelayedExpansion Rem ################################# Rem ## Brainstorm of user-editable part ## Rem ################################# set "Puddle=eu1.ethermine.org:4444" ready "WALLET=0x360d6f9efea21c82d341504366fd1c2eeea8fa9d.lolMinerWorker" Rem ################################# Rem ## Terminate of user-editable part ## Rem ################################# lolMiner .exe --algo ETHASH --puddle !POOL! --user !WALLET! timeout x Video Guide
Batch file for Nicehash
lolMiner .exe --algo ETHASH --pool daggerhashimoto.eu-west.nicehash.com:3353 --user 3 HHG3zpxP4AmbKDR9iRy1c2bqAb4WKhNwm.worker --tls 0 --ethstratum ETHV1 interruption This is the 2nd, easier way to specify a batch file:
And an explanation:
-
lolMiner.exe- the proper noun of the programme that will be launched -
--algo ETHASH- algorithm name -
--pool daggerhashimoto.eu-west.nicehash.com:3353- specify the pool address and port -
--user 3HHG3zpxP4AmbKDR9iRy1c2bqAb4WKhNwm- specify the wallet accost from Nicehash -
.worker- afterward the dot we betoken the name of the worker (whatever proper name) -
--tls 0- specify the TLS blazon (leave 0) -
--ethstratum ETHV1- specify the blazon of protocol Stratum
A finished example:
lolMiner.exe --algo ETHASH --puddle daggerhashimoto.eu-west.nicehash.com:3353 --user 3HHG3zpxP4AmbKDR9iRy1c2bqAb4WKhNwm.worker --tls 0 --ethstratum ETHV1
GMiner & lolMiner LHR ETH Unlock?? (Low Power?) Tested with RTX 3060
GMiner and lolMiner accept both released the latest versions of their respective miners, which boast a like 65-69% unlock for ETH for the LHR cards when combared to NBMiner. Withal, they apparently now consume less ability as well! Ill test is out on Zotac Twin Edge OC RTX 3060 to encounter if that hope holds upward!
a 70% ETH Hashrate Unlock for LHR (Limited Hash Rate) GPUs! Time to test it out on my LHR EVGA 3080 & LHR Zotac 3060 Ti! Does it really evangelize on its 70% FHR promise?
Lolminer - ETH unlock on RTX 3060 LHR v2, RTX 3070 LHR and RTX 3080 ti
Fantastic video. I'chiliad mining ravencoin with my 8 3060ti on Hiveos. I want to become as many every bit possible before halving. I'one thousand getting 27.5mhs with core 220, mem 800 and power 145w.
Commands
To outset mining with Lolmeiner, you demand to specify three things, namely:
- Mining algorithm.
- Pool address or solo address to connect.
- Username / wallet for mining.
Configure the algorithm for mining
LolMiner has 2 ways to specify the algorithm yous want to mine. You need to cull one of them to start mining.
The first option is --algo (-a) followed by one of the following algorithm names:
| Parameter | Algorithm |
|---|---|
| AUTOLYKOS2 | Autolykos |
| BEAM-I | BeamHash |
| BEAM-II | BeamHash |
| BEAM-III | BeamHash |
| C29AE | Cuckoo |
| C29D | CuckarooD |
| C29M | CuckarooM |
| C30CTX | Cuckaroo |
| C31 | Cuckatoo |
| C32 | Cuckatoo |
| CR29-32 | Cuckaroo |
| CR29-40 | Cuckaroo |
| EQUI144_5 | Equihash |
| EQUI192_7 | Equihash |
| EQUI210_9 | Equihash |
| ETCHASH | Etchash |
| ETHASH | Ethash |
| TON | SHA256-TON |
| UBQHASH | Ubqhash |
| ZEL | ZelHash |
Note that you can ever find out the supported algorithms with the command: lolMiner –listing-algos. The size of the commission will also be shown. This list will inform you if the program supports the algorithm / requires the personalization parameter (--pers), which is needed for some Equihash-based algorithms.
The second way to configure lolMiner is through the --money (-c) parameter. This option sets more detailed settings for the selected profiles and allows you to use special features such every bit algorithm switches or a combination of an algorithm with the right personalization.
You can cheque the detailed list of additional parameters for lolMiner using the lolMiner -h command.
Dual mining
Dual mining is the process of mining two specific coins on the same video menu (or mining farm). Thank you to dual mining, you lot can increase your turn a profit. You can mine ETH/ETC/UBQHASH and TON at the same time.
You need to brand sure that on Windows or Linux (HiveOs, RaveOS) yous update the program to the latest version.
We must also have into account that the power supply may require a few extra watts. This is because during dual mining, the power consumption of video cards increases, the temperature increases appropriately, too every bit the cost of electricity.
Hither is what we go after setting up.
Just set upwardly your batch file or flightsheet/profile/wallet ETH/ETC/UBQHASH and become to settings:
For HiveOS
Enter Setup Miner Config and write Extra config arguments.
or:
Select TONDUAL, then you must consummate:
- For Tonwhales.com Pool :
https://puddle.services.tonwhales.com Wallet: Your_Ton_Wallet - For Ton-pool.com:
https://next.ton-puddle.com Wallet: Your_Ton_Wallet - For Toncoinpool.io pool:
wss://pplns.toncoinpool.io/stratum Wallet: Your_Ton_Wallet
ETH + TON Dual Mining Definitive Guide. Overclocking, Profitability, Setup for HiveOS
3070s non lhr. Try:
- 1350 Core clock
- 2400 Mem clock
- Power Limit 150W
i get 60mhs on ETH and one.4ghz on TON each. Some piece of work at 145pl, some need 155w.
For RaveOS
Just select a pool and click on the pencil icon.
There nosotros must add together the command:
- For Tonwhales.com
--dualmode TONDUAL --dualpool https://pool.services.tonwhales.com --dualuser Your_Ton_Wallet - For Ton-puddle.com
--dualmode TONDUAL --dualpool https://next.ton-pool.com --dualuser Your_Ton_Wallet - For Toncoinpool.io
--dualmode TONDUAL --dualpool wss://pplns.toncoinpool.io/stratum --dualuser Your_Ton_Wallet
RaveOS Dual Mining Ethereum (ETH) and Zilliqa (ZIL) - ETH+ZIL with lolMiner or Ethereum Classic (ETC)
Control for RaveOS: --enablezilcache --dualmode zil --dualpool eu.ezil.me:5555 --dualuser %WAL%.your_zil_wallet
Please note that in dual fashion, the hashrate on Ethereum may drib, and the cards will become very hot, and power consumption will increase.
Windows: Lolminer vs t-male monarch dual mining - eth+ton vs eth+alph - maximum profit
I think ERGO has a very good future. TON nevertheless, is likewise very prissy, but with the current rate will go POS.
So it'due south kind of a race to get the max of both ERG+TON lol. All-time way is to catechumen ETH to ERG, while mining ETH+TON. I am nigh washed reaching my ALPH hold goal and so will trade ETH for ERG.
Batch file:
set "POOL=eth.hiveon.com:4444" set "WALLET=0x5576999cc34c1c0030f28939444d6ba9cd6919c2.lolMinerWorker" set "TONPOOL=https://server1.whalestonpool.com" set "TONWALLET=EQDk8olXYxBsrxiKvZSQMO1-Jjmx9_e-yNjvePJ3dxHlnAwf" For MMPOS
Become to Miner Profiles, Manage Contour and Advanced and select your secondary coin. And in the arguments, specify:
- For Tonwhales.com
--algo ETHASH --puddle %pool_server%:%pool_port% --user %user% --apiport %api_port% --worker %rig_name% --log off --dualmode TONDUAL --dualpool https :// puddle.services.tonwhales.com --dualuser Your_Ton_Wallet - For Ton-pool.com
--algo ETHASH --pool %pool_server%:%pool_port% --user %user% --apiport %api_port% --worker %rig_name% --log off --dualmode TONDUAL -- dualpool https://next.ton-pool.com --dualuser Your_Ton_Wallet - For Toncoinpool.io
--algo ETHASH --pool %pool_server%:%pool_port% --user %user% --apiport %api_port% --worker %rig_name% --log off --dualmode TONDUAL --dualpool wss :// pplns.toncoinpool.io/stratum --dualuser Your_Ton_Wallet
Complete list of commands
Allowed options:
General:
-h [ --aid ] Help screen --config arg (=./lolMiner.cfg) Config file --json arg (=./user_config.json) Config file in Json format --profile arg Profile to load from Json file --nocolor [= arg (= on )] (= off ) Disable colors in output --basecolor [= arg (= on )] (= off ) Use 16 colors scheme for non -rgb terminals --list-coins Listing all supported coin profiles --list-algos List all supported algorithms --list-devices Listing all supported & detected GPUs in your organisation -five [ --version ] Impress lolMiner version number Mining:
-c [ --coin ] arg The money to mine -a [ --algo ] arg The algorithm to mine. This is an culling to --coin. -p [ --pool ] arg Mining pool to mine on Format: < pool >:<port> -u [ --user ] arg Wallet or pool user account to mine on --pass arg Pool user account password ( Optional ) --tls arg Toggle TLS ( "on" / "off" ) --devices arg The devices to mine on Values: ALL / AMD / NVIDIA or a comma separated list of indexces. --devicesbypcie [= arg (= on )] (= off ) Interpret --devices as list of PCIE Charabanc :SLOT pair --pers arg The personalization string. Required when using --algo for Equihash algorithms --keepfree arg (= 8 ) Set the number of MBytes of GPU retentivity that should be left complimentary by the miner. --benchmark arg The algorithm to benchmark Managing Options:
--watchdog arg (= script ) Specify which action to accept when a carte is detected to be crashed. "off": Continue working on remaining cards. No action. "leave": Leave the miner with exit code 42 to ask for a restart. Recommended for Nvidia cards. "script": Phone call an external script. Default and recommended for AMD cards. --watchdogscript arg Specify which script to be executed when a hung GPU is detected --computemode [= arg (= i )] (= 0 ) Ask lolMiner to enable AMD compute mode for supported GPUs. Requires previleges to change system settings. --singlethread [= arg (=- 1 )] (=- two ) Enable unmarried mining thread manner for all GPUs (- 1 ) or for a specific GPU id. --tstart arg (= 0 ) Minimal temperature for a GPU to start in degree C. If fix to 0 disables restart below a fixed temperature. --tstop arg (= 0 ) Temperature to pause or stop a GPU from mining in caste C. If ready to 0 disables stop higher up a fixed temperature. --tmode arg (= border ) Mode for temperature management. Apply "edge" ( default ), "junction" or "memory" to set up the mode for temperature management. Statistics:
--apiport arg (= 0 ) The port the API will apply --apihost arg (= 0.0.0.0) The host bounden the API volition use --longstats arg (= 150 ) Long statistics interval --shortstats arg (= 30 ) Short statistics interval --statsformat arg (= default ) Format for long statistics. Use --assistance-format to become an overview of available fields. --aid-format [= arg (= one )] Format description for --statsformat --digits arg Number of digits in hash speed subsequently delimiter --timeprint [= arg (= on )] (= off ) Enables time stamp on short statistics ( "on" / "off" ) --compactaccept [= arg (= on )] (= off ) Enables compact accept notification --log [= arg (= on )] Enables press a log file ( "on" / "off" ) --logfile arg Path to a custom log file location Overclock (Experimental):
--cclk arg (=*) The core clock used for the GPUs. Cards are separated with a comma. "*" tin can be used to skip a card. Ethash Options:
--ethstratum arg (= ETHPROXY ) Ethash stratum mode. Available options: ETHV1: EthereumStratum/1.0.0 ( Nicehash ) ETHPROXY: Ethereum Proxy --worker arg (= eth1.0) Separate worker proper name for Ethereum Proxy stratum mode. --mode arg (= b ) Kernel mode to mine on. Comma separated values for configuring multiple cards differently. --lhrtune arg (= 0 ) Showtime to virtually of import LHR parameters. If your bill of fare is unstable or does not unlock endeavor negative values. Range is +/- twenty. --disable-dag-verify [= arg (= one )] (= 0 ) Disable the CPU side verification and repair of DAG. -- 4 m -alloc-size arg (= 0 ) Sets the DAG size ( in MByte ) the miner is allowed to use on 4 G cards. Can be a comma separated list of values for each card. Suggested values: Linux: 4080 Windows: 4024 --zombie-tune arg (= auto ) Sets the Zomie tune mode ( auto or 0 - 3 ) for Polaris GPUs. Can be a comma separated list of values to ready for each menu individually. --dagdelay [= arg (= 0 )] (=- 1 ) Delay between creating the DAG buffers for the GPUs. Negative values enable parallel generation ( default ). --enablezilcache [= arg (= 1 )] (= 0 ) Allows 8 G + GPUs to shop the DAG for mining Zilliqa. It will generated simply once and offers a faster switching. --benchepoch arg (= 350 ) The DAG epoch the denchmark mode volition use Ethash Expert Options:
--workmulti arg (= 180 ) Modifys the amount of Ethash work a GPU does per batch. --rebuild-defect arg (= 3 ) Triggers a DAG rebuild if a carte du jour produced < param > defect shares. Default is iii , use 0 to deactivate the rebuild. --enable-ecip 1099 [= arg (= on )] (= off ) Enable reduced DAG size for mining ETC from block 11.730.000 and college. --disableLinux 56 fix [= arg (= on )] (= off ) Disables the startup workaround for Polaris GPUs on Linux kernel 5.6. --win four galloc [= arg (= 1 )] (= 1 ) Enables ( 1 ) / Disables ( 0 ) experimental iv G DAG allocation style on Windows. Algorithm Separate Options:
--dualmode arg (= none ) Dual way used. Allowed options: none , zil , zilEx , eth , etc --dualpool arg Pool configuration for actress connection , Format < pool >:<port> --dualuser arg Username or wallet accost for the extra connection --dualpass arg Password for the extra connection ( Optional ) --dualdevices arg Split rule for etc and beam dissever mode. Apply a comma separated list of indexes or "4G" ( default ). Algorithms and DevFee
| Algorithm | Fee % |
|---|---|
| Autolykos V2 | i.five |
| BeamHash III | ane.0 |
| Cuckoo 29 | 2.0 |
| CuckarooD 29 | 2.0 |
| CuckarooM 29 | 2.0 |
| Cuckaroo thirty CTXC | ii.five |
| Cuckatoo 31 | 2.0 |
| Cuckatoo 32 | 2.0 |
| Cuckaroo 29-32 | 1.0 |
| Cuckaroo 29-xl | 1.0 |
| Equihash 144/5 | 1.0 |
| Equihash 192/seven | 1.0 |
| Equihash 210/nine | i.0 |
| Etchash | 0.7 |
| Ethash | 0.vii |
| ZelHash | 1.0 |
Driver requirements
Nvidia: Cuda x or xi
AMD:
- Big Navi: amdgpu-pro xx.forty (Linux) / Adrenaline 20.eleven.2 (Windows) and newer.
- Navi: amdgpu-pro xix.30 (Linux) / Adrenaline 19.10.02 (Windows) and newer.
- Vega: amdgpu-pro 18.50 (Linux) / Adrenaline 18.ten (Windows) and newer.
- onetime cards: Blockchain drivers and newer.
Alternatives
- Nbminer
- Gminer
- Trexminer
- PhoenixMiner
- Teamredminer
- Wildrig
- Ccminer
CPU mining:
- CPUminer
Flash bios program:
- SRBpolaris
Releases
1.45
1.44
- Added experimental Ethash + Ton dual mining kernels for Nvidia Pascal generation GPUs.
- Setting the parameter
--maxdualimpactto 0 will now completely disable dual mining on this card. - Setting the parameter
--dualdevicescan now be used to make GPUs mine Ton simply in Eth+Ton dual mode. In combination with--maxdualimpactthis means one can cull for every card which algorithm to mine. - Automated tuning for dual mining will now always make sure the parameter is adjusted then the GPUs start on both algorithms if
--maxdualimpactis not set. Manually setting--maxdualimpactwill disable automatic parameter stretching. - icemining.ca Ton stratum now tin can utilise the
--passor--dualpassparameter to employ pool settings. - Fixed a bug that might crusade a
SIGSEVorSIGPIPEcrash on some Linux platforms when reconnecting. - Fixed a bug with
icemining.caTon stratumnon sending correct job id when dual mining on AMD cards.
ane.43
1.42
Added ability to lock the memory clock on Nvidia RTX 3000 serial. Use parameter --mclk to do so (requires admin / sudo permissions and Nvidia driver 470 series or newer).
1.41b
- Improved operation of Nvidia TON kernels, especially significant on Turing based GPUs.
1.40
- improved performance of TON solvers by up to 1.v% depending on your GPU;
- lowered TON miner fee to 1.5% –> 1%;
- increased
TON httpsmining polling interval for less server load; - improved blocking preventing mechanisms lolMiner can now communicate with
stratumsusingwebsocketsstarting withwss://; - significantly improved TON mining pool compatibility;
- added a new parameter
--ton-modeto toggle betwixt modes;
Problems fixes: fixed a problems with TON https polling causing random crashes on some machines; fixed a bug with TON: defect shares were not displayed in stats overview; stock-still a bug with TON OpenCL back finish: miner did trigger watchdog when a GPU was halted and waiting for piece of work)
1.39
Characteristic Changes
- Added support for mining TON. Apply
--algo TONto mine information technology. Developer fee is i.five%, AMD cards since GCN1 (via OpenCL) and Nvidia cards Maxwell and newer generation (via Cuda) are supported. - Added support for mining Ubiq. Employ
--algo UBQHASHto mine it. The fee is 0.vii% every bit with all Ethash based coins. - Added back up for routing your stratum traffic through a socks5 proxy server. Use
--socks5: to enable it. Note: at the moment this does not work with https traffic as in the TON algorithm. We volition piece of work on that.
Fixes
- Added a timeout for DOH requests, so they can no longer hang indefinitely.
- Fixed ethash support for RX 5500 series GPUs on more recent drivers.
Notes well-nigh TON pool connectedness:
At the moment just the https pool communication protocol is supported. Therefore your --pool address must beginning with https://. This protocol is not ideal for mining, just we work on establishing a existent stratum protocol with some pools in the near future, stay tuned!
Note when using a pool address starting with https:// specifying a port is optional (the default 443 is used when not specifying one). Also when mining TON via https lolMiner automatically uses TLS 1.2 encryption with skipped host name verification. As a last observe: ever make sure your TON puddle either does not need miner wallet registration or you registered - many popular pools require to register your wallet address to mine information technology.
Notes about TON performance and tuning:
With regard to tuning for TON: The algorithm needs cadre, core and more cadre. Therefore maximizing the core clock within the limits of you cooling and energy supply is the key for the ideal functioning. It might be beneficial to reduce the core voltage to produce less heat and less free energy consumption - this style the cards go along more distance to their thermal limits and can often clock higher as well. We recommend this algorithm on your AMD RX 6000 cards!
ane.37
- Added DNS over HTTPS proper name resolving for establishing your pool connection. This has advantages when your normal DNS resolving might be blocked or modified by a firewall. Y'all tin control its beliefs with the parameter
--dns-over-httpsvalue with the values 0: turns DNS over HTTPS off; 1: DNS over HTTPS is enabled, fallback to normal DNS resolving is possible (default); two: enforcing DNS over HTTPS, normal DNS is completely disables (1) - Updated internal libraries for TLS connectedness treatment
- Moved more fee pools to use TLS connection. When mining Ethash, Etchash (both +ZIL), Ergo and Axle the fee connection is now always encrypted (TLS 1.ii) and mining data packages can not exist identified as such.
- Changed LHR kernel defaults for RTX 3060 and RTX 3070, because the default ones had an consequence with defect shares at high oc.
1.37
(Note: The windows version volition exist delayed a bit - nosotros demand to make sure first LHR unlocking is working there as expected) Characteristic Changes
- Improved Ethash performance on Turing based graphic cards (GTX sixteen serial, RTX 20 series, lower tier CMP cards) by well-nigh 0.4 to 0.seven%.
- Improvement of Ethash performance (up to ane%) and reduction of dried share rate for Maxwell and Pascal (GTX 10) based GPUs.
- Changes LHR tuning algorithm to minimize the number of locks & time for finding a stable value: The tuning might exist improved by the miner later in one case stable for long plenty time.
- Improved LHR operation for 3060 V1 (GA106-300-A1) on older drivers (460.39 and before)
- Added Ergo kernels for RX 6700XT and RX 6600 (XT) on newer AMD drivers.
- Ethereum stratum code will now impress the pool difficulty in meliorate human readable number
- The miner will at present impress the ip of the connected pool - to be able to observe e.m. faulty DNS entries
- Added parameters
--dualtlsand--dualworkerto toggle TLS and the worker name for the dual connexion. To exist used as with the parameters for the standard connection. -
--statsformatcan now distinguish between the number of LHR locks "lhrlks" and the current--lhrtuneparameterlhrparam - Added a parameter
--vstatsto modify the terminal width in number of characters to overwrite the automatic detection, which sometimes does not work with some final emulators like putty. - Added a parameter
--hstats. Given this parameter volition switch the statistics to a manner such that the statistics write a horizontal line per GPU instead of the default vertical (run across screenshot below). When the automatic read terminal width is reached, the remaining entries will be printed to a 2nd set up of lines. The vertical statistics can be combined with the usual--statsformatpatterns to customize the displayed values per card. The optional number overwrites the the automatic screen width detection. To fit all values of--statsformatextended into one line we need--hstats 150or higher (recommended setting this value manually when accessing the rig via terminal emulator). Fixes - Fixed 3060 V1 (GA106-300-A1) internal parameters for drivers 460.39 and below, stabilizing the hash rate (they pretty much did not work stably unlocked in 1.36)
- Fixed a bug causing a wavy hash-rate report in some FHR rigs
- Stock-still a bug causing
--modea kernels to be defect for Ampere and Turing GPUs in one.36(a) releases - Fixed a issues causing a division mistake when trying to mine EXCC.
1.36a
Feature updates
- Improved Ethash & Etchash performance on all Nvidia Turing & Ampere GPUs by 0.3 to 0.7% depending on bill of fare & system.
- Decreased rate of stales on Nvidia Turing & Ampere GPUs.
- Modified LHR auto tuning to use finer steps (0.2 instead of 1). Also when the miner is more then two hours stable on its current settings and a lock appears, the carte du jour will unlock once more, just the tuning will not be reduced.
- New parameter:
--lhrwait nwill set the miner to wait n seconds, until the LHR detection and calibration gets active. Allows to wait for systems with delayed retentivity overclock settings.
Fixes
- Fixed a potential crash between switching between buried Eth and Zil dag on Nvidia cards
- Fixed a bug: Worker name got lost on ezil.me mining pool (since 1.34)
- Fixed a bug causing rare defect shares on LHR cards
- 1.36a: Fixed a bug causing no LHR unlock to normal speed after epoch modify
- one.36a: Reverted some LHR kernels to a specification more than similar to what was in one.35. These are default in Windows and on RTX 3080 on Linux, other cards can request this kernels past using
--lhrtune wautoor wTuneNumber in example the default is unstable.
1.35
Characteristic changes
- Ergo: Adapted all codes mining Autolykos v2 to be ready for the epoch 1 and higher, starting Sunday Nov seventh ~viii am UTC. To continue mining Ergo, delight update to this version. (ane)
- Ergo: Added ability for all AMD cards to pre-build the next Ergo data set while mining. This is at a cost of slightly slower mining directly afterwards a peak modify, but generally improves poolside performance. In instance you find information technology unstable the pre-edifice tin be deactivated by using parameter
--ergo-prebuild -1 / 0 / 1. Hither -1 stands for the cards default, 0 is off, i is on. Default is on for all AMD GPUs except GCN1 and Vega generations - those were more stable with the option turned off. The value can be gear up per card past using a comma separated list of values. -
Ergo: Improved functioning of AMD Hawaii generation of fries by about 2%. -
Ethash: Added error correcting tables to check the DAG integrity upward to epoch 499 (Early on June 2022) -
Ethash: Added pick to utilise the version ane.33 semi-unlocker way - this was more performant for some GDDR6X cards. Employ--lhrtune xautoto activate the 1.33 solver style automobile tuning and apply –lhrtune x to ready a predetermined tune value. The 1.33 style solver tin can be mixed with 1.34+ way solvers past using a comma separated list of values.
Bug fixes
- Ethash: Fixed a bug some crashed Nvidia cards did not trigger the watchdog
- Ethash: Fixed a bug causing the worker proper name not to be correctly passed to the pool in some cases in one.34(a)
(1) The new Ergo epochs will increase the size of the data prepare used for mining by 5% every ~75 days. Some cards might need a fleck more core clock to achieve the used functioning. Also 2G cards in zombie manner will encounter a meaning reduction in speed, because the data set is more than and then 2150 MBytes in size now.
1.34a
- Added further epochs to the dag correction detection / tabular array. This can resolve bug with defect shares that appeared in 1.34 or before with starting time of epoch 450.
- Slightly changes internal LHR parameters of 3070 ti & 3080 - we hope to improve stability by this plus a pocket-size speedup.
one.34
- Improved operation of RTX 3060 and RTX 3060 Ti past upwards to ii%, generally assuasive a chip less core clock.
- Auto tuning will now be quicker to reasonable hashrates.
- Improved stability on found parameters.
- Found parameters that are difficult coded with
--lhrtuneare now applied within 30 seconds after dag build. -
--lhrtunenow understands the parameter "off" to disable whatsoever kind of LHR handling - this is useful for cards that sometimes trigger the lhr detection although they are non-LHR. - Improved compatibility with many current drivers. Yet on Linux we recommend 470.74 for LHR v2 cards. The 460 serial drivers might perform up to 0.five% worse. For 3060 LHR V1 use either 460.39 or earlier commuter.
- The parameter
--workmultiat present has outcome on Nvidia GPUs on Ethash. Default value is 192, lower values will better stale count, higher values will reduce CPU load (and can exist a tiny flake quicker, although only very tiny). - Added support of RTX A6000 / RTX A5000 / RTX A4000 (and future RTX A2000) Nvidia workstation GPUs.
- Reduced RAM usage of Nvidia Ethash solver (some 10+ card rigs got bug with 1.33 when they but had 4G of retentiveness).
-
--statsformatnow understands the string "lhrinfo" to print the--lhrtuneparameter and the lock count in custom prepare statistics. - Fixed a problems with
--tstopor a lost stratum connection triggering a LHR GPU to lock. - Stock-still a bug that RTX 3070Ti only triggered the lock detector on rather depression memory clock.
- Stock-still a bug with invalid shares in Pitcairn Ergo Zombie mode.
- Improved stability of Ethash stratum and statistics module.
1.33
Core Feature: Complete rework of LHR semi-unlock feature.
- Meliorate performance of LHR semi-unlock, about seventy%+ on GDDR6x cards (3070 Ti & 3080 (Ti) ), almost 71-72%+ on GDDR6 (3060 (Ti) & 3070), 81%+ on 3060 LHR V1 with the right drivers (before then 460.39). Recommended driver for LHR v2: 470.74 (Linux), 472.12 (Windows)
Important hint: We saw some scale bugs with 460.93 driver (Linux). Please practice not use it!
- Less performance difference between depression and high cadre clock then earlier versions
- Cards are automatically detected if they are LHR - no more
--wayswitch required - In the starting time the miner volition calibrate to your exact core & memory clocks. The total procedure takes 3-4 minutes total, one with rather depression speed and the remaining fourth dimension with speed closer to the concluding value. Try not to change any overclock after or during calibration, else the performance might be lower then expected!
-
--lhrtunehas now default value of auto for an automated tuning. Results of automatic tuning will be displayed in stats after calibration is completed. Notation: re-tuning of values used in one.32a is required!
Other feature changes
- Default
--shortstatsinterval lowered to 15 seconds, default--longstatsinterval lowered to threescore seconds - More stable displayed hashrate on Nvidia cards when mining Eth
- Changes in Api: On supported algorithms the miner now exposes the number of stale shares in API (stales and defect shares are no longer collapsed into i value)
Fixes:
- Fixed a problems with processing old style
--dualmodeetc dualmine settings - Fixed some pocket-size bugs of the API
- Fixed a problems causing a not-realistic high hash rate to be displayed on LHR cards when overclocked after starting time
Source: https://miningsoft.org/en/miners/lolminer/
Posted by: johnsonutred1960.blogspot.com
0 Response to "How To Clean Out A Watts Lfn45bm1"
Post a Comment